The Filter Integrity Tester "it-01" is a compact handy portable filter integrity test instrument, which is used for all standard filter integrity tests on both hydrophilic and hydrophobic membrane filters. It is easy to use and program.
Due to its design, it can be easily used in inaccessible places, e.g. on huge vessels, in autoclave rooms and on Freeze Drying Systems.
In addition to filter integrity tests the Filter Integrity Tester "it-01" is capable of checking unknown volumes (e.g. the upstream volume of filter systems between 0,1-35L) and can be used as a calibration pressure gauge (0-4, 0-6 or 0-8 barg).
*Additional accessories necessary!
Brochure _it-01_ (pdf)
HerunterladenThe Filter Integrity Test Trolley "ita-01" is a compact mobile filter integrity test instrument designed for all standard filter integrity tests on both hydrophilic and hydrophobic membrane filters.
In addition to filter integrity tests this instrument can be used as a calibration pressure gauge (0-4 or 0-6 barg) and is capable of checking unknown volumes, e.g. the upstream volume of a filter housing (from 0,1 to 35L).
*Additional accessories necessary!
Brochure _it-01_ (pdf)
HerunterladenThe Filter Integrity Test Trolley "ita-02" is a compact, mobile filter integrity test trolley designed for all standard filter integrity tests on both hydrophilic and hydrophobic membrane filters.
In addition to integrity testing this instrument can be used as a calibration pressure gauge (0-4 or 0-8 barg) and is capable of checking unknown volumes, e.g. the upstream volume of a filter housing (from 0,1 to 35L).
- The Diffusion Test (Forward Flow Test), based on the guideline DIN 58356 Part 2
- The Bubble Point Test
- The Diffusion and Bubble Point Tests
- The Pressure Drop Test (Pressure Hold Test)
- The Pressure Drop Test on huge vessels or fermenters up to 10 m³ *
- The Pressure Drop Test on plastic bags up
to 50L*
- The Filter Integrity Tests with the
automatic filter wetting*
- The Water Intrusion Test (WIT), based on the DIN guideline DIN 58356 Part 12
- The Water Intrusion Test (WIT) on huge filter systems up to 150L*
- The Water Intrusion Test (WIT) with the automatic cooling of the filter housing*
- The filter integrity testing can be conducted over a long distance (50m) with draining or venting directly on the filter housing (no contamination from exhaust gases)*
*Additional accessories necessary!
Note: High Reliability by Redundancy!
If any technical problems in one of the two instruments occur, the test device can be easily dismantled from the trolley and sent to a manufacturer to repair it. The second instrument can continue to run filter tests. In-place Tests can be easily handled up to
10 m around the trolley.
ita-02 (pdf)
HerunterladenCopyright © 2024 Flow Test GmbH – Alle Rechte vorbehalten.